Exam at a glance

Journeyman Electrical
70 items in 210 minutes
Passing score
49 correct
Journeyman exam fee
$100, paid to PSI
Tested code
2020 NEC per the November 2026 PSI bulletin
State rules on the outline
10 items across six licensing topics
Scheduling prerequisite
Board for Contractors approval

Match the book to the question

The November 16, 2026 PSI tradesman bulletin identifies the 2020 NEC as the basis for electrical code questions. It also lists the Virginia Board for Contractors Individual License and Certification Regulations and links to the 2024 edition of NFPA 70E. Treat those as three distinct resources for installation rules, Virginia licensing obligations, and electrical workplace safety. In your first practice session, sort a dozen prompts by source before opening any book.

PSI allows other editions under its general reference rule and specifies that code items are written to the edition listed. Use the 2020 volume in timed rehearsals so index entries, tables, and exceptions line up with the tested edition. Virginia DHCD separately identifies the 2020 NEC in the field code adoption that took effect January 18, 2024. Check the jurisdiction's applicable project code for field work and PSI's listing for your examination appointment.

Prepare the Virginia rules as a short, separate study block

The journeyman outline begins with ten items spread across state practice, conduct, renewal and reinstatement, definitions, qualification, and revocation. Use the Board's regulations to build a one-page index for study. For each subject, write a sample question and the heading or regulation number you would look under. Practice with a separate copy of the index at home, then repeat the exercise using only the reference you can bring into the room.

Start with a distinction you will use during application as well as study. A person trying to qualify to sit for the exam needs the examination approval requirements. A person whose credential has expired needs the renewal or reinstatement provisions. Use the question's verb and the status of the person's license to select the provision before reading the conditions.

Pair conductors with raceways, then switch to services

PSI assigns seven questions each to conductors and cables and to raceways and boxes. Grounding and bonding has six, while services and feeders and motors and controls have five each. Try one paired drill for each major area. For conductors and raceways, write one prompt that asks for allowable ampacity and one that asks whether conductors fit in a raceway. Use the same conductor description and explain why each problem calls for different tables and inputs.

Next, take a simple service sketch and a feeder sketch and label the conductors and equipment shown. Use those labels to choose your search terms for a service or bonding question. For motors, practice reading which quantity the prompt asks for before selecting a rule. End with a mixed round covering safety and the smaller categories listed by PSI. If most of your misses came from selecting the wrong rule, practice sorting questions by source or code article before adding more calculation drills.

Do one practice run with the print set you plan to bring

Send your application and applicable evidence to DPOR first, then schedule the Journeyman Electrician exam with PSI after Board approval. Budget the $100 PSI exam fee separately. The journeyman outline and fee are distinct from the master designation.

PSI describes an open-book exam with candidate-supplied references. It permits highlighting, underlining, and permanent tabs while disallowing handwritten material and loose reference sheets. Its bulletin gives binding options for downloaded references, including a binder for hole-punched pages. Assemble the regulations that way if you print them. For a timed rehearsal, use only your permitted references and aim to clear a 20-question round in 60 minutes, which matches the published average pace.

Prepare for your appointment

  • Wait for DPOR approval before scheduling the Journeyman Electrician exam with PSI.
  • Gather the NEC edition, state regulations, and NFPA 70E reference listed by PSI.
  • Prepare a permitted bound copy of the DPOR regulations if printing them.
  • Do a Virginia rules location drill without using your study notes.
  • Time a mixed round that includes conductors, raceways, services, and state rules.

Save this checklist in your study plan

Try a question

A practice set asks which Virginia rule governs an expired tradesman credential, then asks what determines the permitted conductor ampacity. Which source do you check first for each?

Show the answer

The Virginia individual tradesman regulations for the credential and the 2020 NEC for ampacity.

The first prompt concerns a state credential and its renewal or reinstatement. The second concerns installation requirements. Choose the governing source before searching within it.

Sources