Exam at a glance

Exam provider
Prov
Written format
100 questions in 240 minutes, open book
Written passing score
At least 75%
Tested NEC edition
2023, per Prov’s Journeyman written reference list
Practical
Six modules taken in person at a Utah Prov testing center
Early testing
Completed education program and 6,000 qualifying hours on the specified program route

Work out when you can test and when you can apply

Utah’s Electricians Licensing Act Rule, effective November 5, 2026, sets out a testing threshold for the standard education route. You can sit for the journeyman exams once you complete the required study program and log at least 6,000 qualifying full-time hours. The license itself calls for 8,000 hours as a licensed apprentice and an approved 576-hour program completed over at least 48 months. The experience-only route calls for 16,000 hours. If you plan to use competency exams as an education substitute, verify your specific route under the expedited licensure rule with DOPL before booking.

DOPL’s exam page says you can register without preapproval, while its general FAQ refers to meeting work and school requirements before being approved. Prov’s eligibility summary describes full licensure. Apply the current rule to your test eligibility and use the DOPL exam page for registration. If your training program or provider account shows a different threshold, confirm with DOPL Exams at [email protected] before paying. Keep the documents that show completed coursework and countable experience for your eventual application.

Use the combined written outline to decide what to drill

Prov’s current bulletin gives you 240 minutes for 100 questions and a 75% passing score on the combined code and theory exam. It assigns ten questions to grounding and bonding, nine to overcurrent protection, eight to services, feeders and branch circuits, and four to state laws and rules. Five separate categories cover voltage, current, resistance, power and voltage drop. Alternate calculation and code questions during the same timed block to practice changing gears without losing your place.

The Journeyman reference list allows the 2023 NEC, 2023 Ugly’s Electrical References and the specified Utah statutes and rules. Use the Journeyman list, since the Master Law and Rules exam lists additional references. Check the bulletin’s reference preparation rules before inserting tabs or printing statutory extracts. Utah Code § 15A-2-103 also adopts the 2023 NEC for construction, subject to state and local amendments. Treat the statute as the source for field requirements and the Prov bulletin as the source for what you can bring to the exam.

Prepare for the six practical tasks one at a time

Prov’s general practical describes tasks in torque settings, transformer termination, conduit bending, commercial motor control, switch wiring and schematic reading and wiring. A passing task can carry forward if you need to repeat another. DOPL allows the written exam remotely within the United States and requires you to attend an approved Utah Prov center for the practical. If you live out of state, check the practical center’s availability before booking travel.

Use de-energized training setups and ask an instructor to grade one attempt per station. For conduit practice, have a partner set a mock obstruction and check the finished piece against the marks, square, level and fit. For the schematic block, trace the expected contact state on a diagram and verify the mock-up with a continuity meter. Rotate through motor controls and transformer diagrams, then give yourself a fresh drawing so your preparation includes interpreting unfamiliar symbols under time pressure.

Pack from the general practical’s equipment list. It specifies two five-foot lengths of half-inch EMT, a matching bender and reamer, safety glasses and cut-resistant gloves, among other tools. Prov supplies the torque wrench. Prov posts two sets of timings. For example, the individual switch module listing gives 15 minutes, while the general practical overview gives 30. For torque the numbers are 15 and five, respectively. Confirm the time limits on your booking and use the shorter published times as practice targets.

Keep the result for each part

Save the written result and practical results as you receive them. If you miss one practical task, compare your report with the exact task name in Prov’s scheduler before booking again. Utah’s rule generally requires at least 30 days after a failed exam through the sixth failure, and at least 120 days after subsequent failures. Confirm the applicable date with Prov when retaking an individual practical module.

Prepare for your appointment

  • Match your completed coursework and logged hours to the current rule.
  • Book the combined journeyman written exam and confirm availability for the six general practical modules.
  • Check the written reference list for the permitted NEC and Utah rule materials.
  • Run a timed written block and a separate round of de-energized practical tasks.
  • Pack your own practical tools and materials and save every result.

Save this checklist in your study plan

Try a question

You passed the written exam and five practical modules. You missed conduit bending. Which practical task should you schedule again?

Show the answer

Conduit bending.

Prov carries forward practical tasks you have passed. Use the module result to confirm the exact task to book and rehearse the fit and workmanship checks described in the bulletin.

Sources