Write the target unit first
For an ideal resistor, voltage equals current times resistance: V = I × R. If the question wants current and gives volts and ohms, use I = V ÷ R. In a DC or ideal resistive example, power is P = V × I. If the question gives watts and volts, use I = P ÷ V.
Write the units next to the numbers. Watts divided by volts give amperes. Volts divided by amperes give ohms. If the units fail to match the requested quantity, check the formula before you check the arithmetic.
Tell series and parallel apart
Loads in series share one path and carry the same current. Loads in parallel have the same voltage across them. Find the current in each parallel branch and add the branch currents to get the total supplied current.
Do a quick reasonableness check. If two identical resistors have the same supply voltage in parallel, the total current is twice the current through either one. That relationship gives you a fast way to catch a series calculation used on a parallel question.
Check the assumptions in the question
The equations here use ideal circuit examples. If a question introduces power factor, three-phase power, equipment ratings or a code sizing requirement, identify which calculation the prompt asks for before choosing your equation.
Try a question
A 24 V DC source supplies a 12 Ω resistor and an 8 Ω resistor in parallel. What total current does the source supply?
Show the answer
5 amperes.
Both branches have 24 V across them. The 12 Ω branch draws 24 ÷ 12 = 2 A. The 8 Ω branch draws 24 ÷ 8 = 3 A. Add the branch currents to get 2 + 3 = 5 A. If you got 1.2 A, you added the resistances as though the branches were in series.